KE3700 xDSL-Multitester


KE3700 xDSL MultiTester on uusin tulokas Kurthin KE-monitoimitesteri perheeseen. Aiempien testerien ominaisuuksien lisäksi KE3700:ssa on täysin uusia toimintoja ja ominaisuuksia, kuten Wi-Fi (WLAN) testaus, Bluetooth data-siirto ja kosketusnäyttö.

• eri DSL-palveluiden automaattinen tunnistus
• ADSL-VDSL2 , Vektorointi, BP 35 ja G.fast automaattinen tunnistus
• Annex A/B/J/L/M/Q tuki
• isokokoinen, kirkkaassa auringon valossakin helposti luettava värinäyttö
• Web-selain
• Gigabitin Ethernet-portit
• Ping- ja traceroute-testit (IPv6 ja IPv4)
• Modeemi-, Reititin- ja Terminaali-testimoodit
• Triple Play testi – Data, VOIP, IPTV
• FTP ja HTTP up/downloads
• Suojattu näppäimistö
• KE3700 Touch: kosketusnäyttö
• Kestävä ja suorituskykyinen LiPO-akku
• 4Gb muisti, laajennettava
• Bluetooth datasiirto ja kuulokkeet
• Manager-hallintaohjelmisto
• Wi-Fi (WLAN) toiminto (2,4 GHz) ja analysointiohjelmisto
• testitulosten lukeminen/siirto esim. tabletille QR-kodilla tai Bluetoothilla (Patent Pending)

KE3700 xDSL Multitester

Compliance ADSL1/2/2+ 
 ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M),
 ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L),
 ITU-T G.992.1 (G.DMT incl. Annex A, B, J)
 ATIS/ANSI T1.413 Issue 2
 IEEE 802.3ah (PTM)
 ITU-T G.998.1/2/3 (Bonding)

Compliance VDSL2
 ITU-T G.993.2 Annex A, B (Vectoring)
 ITU-T G.998.1/2/3 (Bonding with Profile 30a)
 Profiles: 8a/b/c/d, 12a/b, 17a, 30a and 35b (Annex Q) optional
 Band Plan: 997, 998, US0
 IEEE 802.3ah (PTM)

Compliance G.fast
 ITU-T G.9700 / 9701

DSL parameters
 Maximum attainable bit rates
 Actual achieved bit rates
 Actual bonded achieved rates
 Latency modes: fast, interleaved
 Data modes: ATM, PTM
 Capacity (%)
 Signal-to-noise ratio (SNR) margin
 Output power
 Attenuation
 Bits/bin 
 Attenuation/bin (Hlog/bin), QLN/bin, SNR/bin
 Vendor code, revision
 Interleave depth
 Interleave delay
 INP
 G.INP
 Vectoring
 Modes: PTM, ATM
 LOS, FEC, CRC, HEC, LOF, LOM, SES, ES
 LATN per band, SATN per band
 
Test interfaces
 G.FAST, VDSL2, ADSL 1/2/2+ with autodetection
 Ethernet 10/100
 Ethernet 10/100/1000 
 Webbrowser applicable for test interfaces
 
Encapsulation
 RFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoE (RFC 2516), PPPoA/LLC and PPPoA/VC-MUX (RFC 2364) 

Operating modes
 DSL Terminal, Router and Modem Mode
 Modem replacement (DSL to Ethernet)
 Ethernet Terminal-Mode
 
Connectivity support
 TR69 / BNG
 LAN/WAN status
 DNS, gateway
 DHCP client / server, DHCP vendor class
 NAT VLAN ID, VLAN tagging
 VPI/VCI
 IPv4 and IPv6
 Signal Strength 

Ping test*
 Ping destination: Gateway, IP-Address or URL
 Number of Pings: 1 to 9999
 Packet size: 56 to 2048 Bytes (default is 56)
 Timeout: 1 to 2000 seconds
 Results: Packets sent/received, average round-trip delay (ms)
 (* Run any number of tests simultaneously) 

Trace Route test*
 Traceroute destination: Gateway, IP-Address or URL
 Timeout: in seconds, maximum is 120 s
 Packetsize: 32 Bytes
 Number of hops: 1 to 100 (default is 30)
 Results: Indicates IP address of hop and round trip time in milliseconds (ms)
 (* Run any number of tests simultaneously)
 
FTP/HTTP speed tests*
 Address: IP or URL
 Direction: Upload and/or Download up to 700 MBit/s
 Results: Time, kB transferred, speed in kBit/s
 Bookmarks: User-definable
 (* Run any number of tests simultaneously) 

Software options
 VoIP Test (terminal simulation):
  SIP protocol support, DSL and Ethernet
  Codecs: G722, GSM, L16, A-Law, µ-Law, Speex
  Results: MOS, R factor, Latency. Jitter, Packets (loss, sent)
 IPTV Test (Set Top Box emulation):
  Video standards: MPEG2, MPEG4 part 2 and 10, DSL and Ethernet
  Programmable channel list, analyzes up to 10 streams simultaneously
  Results: MOS, R factor, Latency. Jitter, Packets (loss, sent)
 
Interface options
 xDSL bonding module**
 SHDSL 2 - 8 wire interface
 KECT copper qualifying up to 31 MHz and Telco Multimeter
 TDR fault detection / localization
 SFP-Port for copper, fiber (second GbE-Port) or GPON, transceiver optional*
 ISDN BRI Uk0 / S0 / POTS interface
 ISDN PRI S2m interface
 Wi-Fi interface with software, 802.11b,g,n
 
Bluetooth
 Bluetooth module for headset connection and data transfer, class 2
 
Display
 3,5" TFT Display, RGB 240 x 320, sunlight readable 

Power supply
 LiPo battery with approximately 4 hours operation at full load mode
 
Dimensions  230 x 110/90 x 70 mm
 
Weight 1100 g
 
Housing
 Impact-resistant ABS case with protective and high impact plexiglass as display cover 

Menu languages German, English, French, Italian, Dutch, Spanish 



Tulostettava versio