Pamspan 501x

PAMSPAN 5012 4W SHDSL bis - vauhtia symmetrisiin datayhteyksiin

PAMSPAN 5012 4W on ITU-T G.991.2-standardin mukainen G.SHDSL bis reititin symmetrisille yhteyksille. Bis-standardi mahdollistaa suuremmat siirtonopeudet (6M, 11M, 22M), kun käytetään useampaa kupariparia. PAMSPAN 5012 4W tukee 1- ja 2-parista yhteyttä tarjoten siten joko 6M tai 11Mbit/s yhteyden. Laite soveltuu operaattoreiden dslam-ympäristöön tai p-to-p yhteyksille.

Pamspan 501x specifications
Standard Compliance Protocol ITU-T G.991.2
« Transmission rate up to 5.69 Mbps on 2-wire « Transmission rate up to 11.38 Mbps on 4-wire « Transmission rate up to 17.07 Mbps on 6-wire « Transmission rate up to 22.76 Mbps on 8-wire « Support of Annex A, Annex B, Annex F, and Annex G « Auto load balancing with bonded pairs « Support point-to-point configuration « Manual or auto rate selectivity Maintenance Firmware upgradeable via FTP or TFTP (optional) Support Telnet Support ATM OAM F5 End to End and Segment loop backs Statistics on DSL link and data ports Sys-log HTTP web downloadable Management Password protection PAP and CHAP support Remote access management via telnet SNMPv1 / SNMPV2 Firewall Security « Packet Filter « Denial of Service « Stateful Packet Inspection (SPI) « Attack Alert and log « Access Control « Real time log MIB-II (RFC 1213, RFC 1573) Web based GUI Command Line Interface (CLI) Protocol Support EFM over G.SHDSL.bis and G.SHDSL Support ATM over G.SHDSL.bis and G.SHDSL MAC bridging (IEEE 802.3 and 802.1D) PPPoE (RFC 2416) RFC 1483/2684 Bridged encapsulation (routing mode optional) IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP IEEE802.1P Priority Output Queuing IEEE 802.1Q VLAN IEEE802.3u Fast Ethernet 100BaseT MAC Filtering QoS support VBR-rt, VBR-nrt, CBR and UBR Support 8 PVCs NAT/PAT support DHCP client/server and DHCP relay functionality Support IGMP Snooping DMZ support Support Port-based VLAN Indicators LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode Physical Interfaces DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jacks Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover AC power adapter (100VAC ~ 240VAC, 50-60Hz) One craft Interface for local console access (CID)

Dimensions & Weight Dimensions: 35mm(H)¡Ñ210mm(W)¡Ñ193mm(D), Weight: 914g

Operating temperature and humidity: 0C to +50C, 5% to 90% RH non-condensing

Linkki valmistajan sivuille

Tulostettava versio